How to Install an eSIM using a QR Code on Huawei Devices

In this guide, you have a step-by-step walkthrough you can take when installing an eSIM on your Huawei Device.

Installing an eSIM using a QR Code.

Before attempting to install the eSIM, there are three main things you will need:

• A strong internet connection - Ideally, you will need to be connected to Wi-fi or have a good 4G signal.
• An eSIM compatible device - If you are unsure, here's a list of compatible devices: List of compatible devices
• The device isn't locked to one Mobile Network - If you are unsure whether or not your device is locked to a certain network, have a look at our article on how to check if your device is "locked/unlocked" Locked/unlocked devices

Do not forget to turn on "Data Roaming" once the installation is complete.

1. Go into your Settings.

2. Click on "Mobile Network".

3. Click on "Sim Management" > Click "Add eSIM".

4. Click on the cross in the bottom left of the screen (Add eSIM) > Scan the "QR Code" given through your eSIMs  bundles account.

5. Click "Add this eSIM" > Wait for the eSIM to download.

Note: This may take up to 10 minutes, please do NOT close this, or the installation will stop. 

6. Once completed, your eSIM should appear in the list. > Make sure the eSIM is enabled, otherwise the eSIM won't work.

Note: Once you have completed these steps, make sure your Data Roaming is "ON" as seen in the photos below, otherwise you will not be able to use the eSIM.