How to install eSIM using a QR Code on Windows Devices

In this guide, you have a step-by-step walkthrough you can take when installing an eSIM on your Windows Device.

Installing an eSIM using a QR Code.

Before attempting to install the eSIM, there are three main things you will need:

• A strong internet connection - Ideally you will need to either be connected to Wi-fi or have a good 4G signal.
• An eSIM compatible device - if you are unsure, compatible devices are listed here: List of compatible devices
• The device isn't locked to one Mobile Network - If you are unsure of whether or not your device is locked to a certain network, have a look at our article on how to check if your device is "locked/unlocked" Locked/unlocked devices

1. Open the "Settings" app on your Windows device.

2. Click on "Network & Internet".

3. Click on "Cellular" in the left-hand menu.

4. Click on "Add a new eSIM profile".

5. Select "Install an eSIM from a QR code".

6. Scan the QR code provided by your mobile network operator using your device's camera.

7. Once the QR code is scanned, the eSIM profile will be automatically downloaded and installed on your device.

8. If prompted, enter any additional details required by your mobile network operator, such as your account information or verification code.

9. Once the installation is complete, your Windows device will be connected to the mobile network using the eSIM.